If you enable this option, a connection to the FTP server will be available for all users without authentication. In the 'Users' section, there is an option 'Anonymous access'. If necessary, you can change the port number (e.g. By default, the server uses the standard TCP port number 21. In the 'Port' field of the 'FTP settings' section, there is a port number for the built-in FTP server. The 'Private cloud' window contains basic server settings and user management functions.Įnable the 'Allow access from the Internet' option if you want to access the FTP server from the external interface. Here you will see the 'Private cloud' panel. You can install the 'FTP server' and 'Application-layer gateway (ALG) for FTP' components on the 'General system settings' page in the 'Updates and component options' section by clicking on the 'Component options' button. Use one of the supported VPN servers - L2TP/IPsec, PPTP, SSTP, IPSec. To increase connection security, you can use a VPN to remote access the FTP server. The Keenetic FTP server supports up to 10 simultaneous connections.ħ. When using FTP ALG, passive FTP mode is supported.Ħ. It is needed for FTP connections from an external network when the client is behind a private IP address and for connections to an FTP server in the local Keenetic network, which is behind a public IP address. Component 'Application-layer gateway (ALG) for FTP' allows you to use the NAT algorithm for the FTP. For FTP server full operation, install the 'FTP server' and 'Application-layer gateway (ALG) for FTP' components on your Keenetic. Therefore, it is important to know that the ISP does not block the FTP server's port.ĥ. Some Internet providers are filtering incoming user traffic on standard protocols and ports (e.g. In 'Cloud access' mode, access to the FTP server is possible via an SSTP connection.Ĥ. If KeenDNS is enabled, direct access to the FTP server will be possible by using the 'Direct access' mode. For more comfortable use, we recommend you to get a permanent and easy to remember domain name for your Keenetic using the KeenDNS service. If you have a private IP address, you can access the FTP server via a tunnelled SSTP connection.ģ. This name will not depend on which IP address is used (dynamic or static), and it will be easy to remember.Ģ. If you have a dynamic IP address that can change continuously, we recommend you to use the Dynamic Domain Name (DDNS) service to assign a permanent name to your Keenetic device. A direct connection to the FTP server from the Internet can only be possible if there is a public IP address on the WAN interface of the Keenetic router through which the Internet is accessed. Access to the server will be provided both from the local network and from the Internet.ġ. In Keenetic devices with the ability to use USB drives, you can enable the built-in FTP server to provide remote access to USB drive files via FTP.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |